F.E.A.R. Scenario Paintball Team
February 10, 2012, 08:32:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Officially entered the off-season. Looking for some indoor parks to play at after the Holidays!
 
   Home   Help Search Login Register  
F.E.A.R. Scenario Paintball Team > Paintball > General Paintball Discussion (Moderator: Varnel) > Topic: SLG?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: SLG?  (Read 160 times)
0 Members and 1 Guest are viewing this topic.
Caboose
Team F.E.A.R. Member
General
***

Repuation: +16/-0
Offline Offline

Posts: 1,097


The tank is DEAD, let it go


WWW
« on: August 11, 2010, 05:47:30 PM »
hey guys my asa on my new slg is somewhat loose ive played a few games its not to loose but i was wondering if its time for an on/off asa cause i highly doubt it so give me some advice
Logged


Proudly Serving the Paintball Community Since 2006!!! Sponsored by MISSION MASTERS / VALKEN / FLASC / CCC /
COMPULSIVE / MSS /
TIBERIUS ARMS
Jackson
Team Sponsor: Mission Masters
General
*****

Repuation: +57/-3
Offline Offline

Posts: 1,740


BAN PIZZA!!!


WWW
« Reply #1 on: August 11, 2010, 05:51:15 PM »
Get Allen wrenches and tighten it?
Logged
Enhander
FEAR
Administrator
General
*****

Repuation: +36/-0
Offline Offline

Posts: 8,148


3 Piece and a Biscuit!


WWW
« Reply #2 on: August 11, 2010, 05:52:28 PM »
Yeah thats the only thing I can think of.
Logged
Caboose
Team F.E.A.R. Member
General
***

Repuation: +16/-0
Offline Offline

Posts: 1,097


The tank is DEAD, let it go


WWW
« Reply #3 on: August 11, 2010, 06:06:38 PM »
i have been it just gets loose after ten minutes of playin lol
Logged


Proudly Serving the Paintball Community Since 2006!!! Sponsored by MISSION MASTERS / VALKEN / FLASC / CCC /
COMPULSIVE / MSS /
TIBERIUS ARMS
Hudd
Team F.E.A.R. Member
General
***

Repuation: +35/-0
Offline Offline

Posts: 2,754



WWW
« Reply #4 on: August 11, 2010, 06:09:46 PM »
Put a drop of blue loctite on each screw. The SLG has a polymer frame I believe so dont over tighten the screws as you could strip the threads out of the frame.
« Last Edit: August 11, 2010, 07:16:59 PM by Hudd » Logged


Proudly Serving the Paintball Community Since 2006!!! Sponsored by MISSION MASTERS / VALKEN / TIBERIUS ARMS/
sn toter
FEAR Supporters and Friends
Lieutenant
*

Repuation: +29/-1
Offline Offline

Posts: 567


I can has automagz?
« Reply #5 on: August 20, 2010, 07:50:28 PM »
Quote from: Hudd on August 11, 2010, 06:09:46 PM
Put a drop of blue loctite on each screw. The SLG has a polymer frame I believe so dont over tighten the screws as you could strip the threads out of the frame.

I had an SLG, this is common stock. Yes, the framy is a hi-test polymer, but iirc there are metal threads for the ASA bolt.  You can loctite like Jackson suggested, of you can wrap that screw with teflon tape then tighten it - that worked for mine.
Logged
Ronin Brotherhood
Pages: [1]   Go Up
  Print  
F.E.A.R. Scenario Paintball Team > Paintball > General Paintball Discussion (Moderator: Varnel) > Topic: SLG?
 « previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.15 | SMF © 2006-2007, Simple Machines Valid XHTML 1.0! Valid CSS!